Thomson ST580 ADSL
(Score this article) 
Loading ... 
FORUM FOR CONSULTATIONS OF ROUTER Thomson ST580
Thomson ST580i Configuration Multipost static Web by Telefonica
Thomson ST580i Configuration Multipost Dynamics of Telefonica by Web
Thomson ST580i Configuration Single Dynamics of Telefonica by Web
Thomson ST580i ports for Web Mapping
[url = downloads / downloads / DSL router / Thomson ST-580 recursive = yes]
If you have any territorial for this section you can send it by pressing HERE.
Tags: ADSL, AdslTodo, Comtrend, FORUM, Forums, Huawei, ID LOW, Imagenio, DTT, Telefonica, Virus, ZyXEL, open ports, ADSL2 +, Amper, antivirus, anti-virus online antivirus online, azureus, BitComet, comparative adsl, comparative, Conceptronic, configuration, setup, which is my ip, duplication, eMule, firmware, FTTH, worms, jazztelia, linksys, offers, router, Sagem, servers, JMS, spyware, test speed, Thomson, Trojans, tvp2p, VDSL , VDSL2, vdsltodo, noslen
December 30th, 2006 at 10:39 a.m.
I want to configure the router Thomson SpeedTouch 580 of Wanadoo, to be able to use the program azureus, provided that any attempt configuration, then in the presence of the program gives me the error.
Certainly I think your brilliant explanations, I was surprised.
Thank you
December 30th, 2006 at 3:29 pm
Joseph, you have to follow this tutorial "Thomson ST580i Mapping ports for Web" on this page http://www.adsltodo.com/adsl-router-thomson-st580/ that although the router is not exactly the same, I imagine that Steps will be similar.
If you do not clarify this tutorial looks from friends of adslzone http://www.adslzone.net/tutorial-20.3.html
March 6th, 2007 at 1:59 pm
I have a router Thomson speedtouch 580 and install it but does not work for me or does not connect the LED dsl, internet did not ignite me I need help please
March 16th, 2007 at 11:44 pm
Using a router Thomson SpeedTouch 580 to XP, but I'm about to change to a computer with the Windows Vista operating system and would like to know if this OS is going to recognize my router without the need for drivers or need a specific driver for Windows Vista?
What is it?
April 27th, 2007 at 12:42 p.m.
Lubra if not the LED lights of broadband is that it is not the signal arrives, call your operator to get it rectify
April 27th, 2007 at 12:44 p.m.
Silvana No need any drivers plugs for your network card to access the gateway, bone and open the browser's address bar and enter 192.168.0.1 put on the website of the st 580, then follow the steps in the Easy installation within advanced, and if in doubt, the manual limps, it's easy seriously and above all the configuration data that was sent to install it. ok
Lucky
April 27th, 2007 at 2:06 pm
lubra, Bear in mind that if you have the router is supplied by telephone, only serves to adsl mounted on an ISDN line and not on a conventional line.
July 22nd, 2007 at 1:25 pm
Where can I get the CD to reconfigure the Speed Touch 580 of Wanadoo for use with Telefonica.
Thank you, a greeting.
July 22nd, 2007 at 5:04 pm
Beginner, because you can not get anywhere. You must configure it manually.
July 24th, 2007 at 2:50 pm
I would appreciate if someone could tell me whether I would SpeedTouch 580 for use with ONO, my phone right now and work for me ... .. thanks so advanced answer
July 24th, 2007 at 3:13 pm
For Silvana Morales, in this direecion you upgrade to Windows Vista http://www.thomsontelecompartner.com/dsl-modems-gateways/products/previous-product-detail.php?id=15, I hope that you serve.
December 20th, 2007 at 12:50 p.m.
How good I have a problem that I am unable to resolve: I just happen to phone from Tele2 and I have the router Thomson st580 that gave me with Tele2 and would like to configure it to work with phone via wifi, because with that I have with telephone is monopuerto and via ethernet.el problem I encounter is that when I go to the router for web and I'm going to advanced -> easy setup, I get three services by default PPPoE, which is the phone that tells me I have to configure and whose descpripcion service in the second set configurator is: DESCRIPTION Routes PPPoE Packet Service configuration using always-on connectivity session.
World REGION
Basic PROVIDER
as you can see that it is not like the description of the service that comes in the video from this site, which is by telefonica.Los others are PPPoA and Bridget ethernet. Well the next problem I see is that the PPPoE to choose the next step is to choose the VPI / VCI, in my case I get a drop-down box with pairs of values VPI / VCI but neither is the value 8 / 32 which are the values virtual circuit and virtual path for telephone and will not let me change or teclado.Por last comment that I could change the gateway of which had to Tele2 (10.0.0.138) to 192.168.1.1 phone that is the following The video of this site, but it now occurs to me that if I ipconfig I get is that just like the connection to Ethernet local area and not for the wireless connection.
Without more help from agradezcosu in advance and hope to hear from you
December 20th, 2007 at 1:56 pm
Try a charge of the firmware up to see if it appear the options you need.
December 20th, 2007 at 3:53 pm
Hello antonio3407 I made the upgrade process, bajandome files that needed to
http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=476 who along with a file that you have put me up I was able to update it (theoretically) well, just that at the end of the process Update told me that the key and the user had changed? (they had gotten myself well and so I let the complex process) and when I got a second time connection error has already told me that the process by update has finished well, but now has new key can not access the router or end the process of configuration, and with heprobado administrator, 1234 ... I hope your help !!!!!!!!!!
December 20th, 2007 at 7:42 pm
Hopu, Try admin and admin or user and admin or root and admin
December 20th, 2007 at 8:40 pm
Hello Hopu, in principle if you do not st 580 and lets you access to any user as admin, root, so you'll need to reset, the way it is, has a small hole behind, because with a click for example, and you'll see that it entered All the lights will flash, well then you'll have with the factory settings. If you have wifi on, put it earlier by ethernet to be able to configure. Well, the next step is to access it through the gateway: http://192.168.0.1 user should not ask but if you asked, admin admin password or 1234. Then Irías to Advanced, Easy Setup or Easy Setup, and you would request the service, you pick the PPPoE, but I am wrong you will come the PPPoE, PPPoA and RFC1483. If I am not mistaken he last used phone because it uses IP, a telefonica you have provided username and password? Well you explain the two methods.
1 PPPoE, if you choose it will have to put a user name and password and you will come to the protocol that same can not change the VPI and the VCI as they are and prederminados is 8.32. If you choose PPPoA 8.35 it would also come from the factory.
2nd RFC1483, if you pick it, the plant will not do the running page of the router if not through the installation cd got a folder called RFC1483 and an executable file, you run it and asks for an ip, that you have to give telephone as well as the username and password and would already be configured.
Then if you want to wifi, you would only install the wireless adapter drives that I believe is the 121g or 120g depending on the model. On the other hand if you're using a laptop with wireless card, it will detect the same network.
Another thing also Hopu, when the user or get the ip not forget to enable the wireless connection or put safety level for anyone to connect to your network.
I hope I helped, but for anything you leave my email. Soulprodige@hotmail.com if I can not access the forum.
A salute.
December 20th, 2007 at 8:59 pm
Hola.Buenas news more or less ... in the end if that was updated either the firmware version 4.3.2.6, searching the net I have seen on a page that this version of firmware has a default gateway and 192.168.1.254 I tried and I had actually entered into the router as an administrator (I have already created a user with administrator privileges), the thing is that now everything has changed the look and I have no idea how recofingurarlo to have the parameters of phone:
Gateway: 192.168.1.1
dir ip: 192.168.1.38
DNS: 80.58.61.250
Secondary DNS: 80.58.61.254
The aspect that offers the web's router so you can see in http://www.adslayuda.com/thomson580.html on the link on the bottom are the ones that have the firmware actualizado.Ah other thing that I've seen is that IP addresses are Router in the mark as static and this is true I do not and will not change as
Oh I forgot with the new firmware if I could put the VCI / VPI 8.32 !!!!!
December 20th, 2007 at 10:37 PM
Hopu in advanced and easy setup, you should have an option PPoE or something like that.
May 23rd, 2008 at 12:03 p.m.
Thomson ST580 [...] [...]
June 24th, 2008 at 5:30 am
How to increase bandwidth through the router ..
June 24th, 2008 at 12:17 p.m.
Burrock, the bandwidth is that you hire, you can not vary.