Cisco 837 ADSL
(1 votes, average: 3 out of 5) 
Loading ... 
Tutorials Cisco router 837
NOTE: pasatealinux clarification, not all of the 800 series routers are used for ADSL, 20 megs. Only used for adsl 20 megs are some of the 870 series, like the 877 and 877w, some of the 1800 series (specifically the 1801 and 1841) and some later.
cisco 800 series configuration interface eth0
cisco 800 series configuration dynamic telefonica
Cisco SEIE 800 configuration in Multi
cisco 800 series opening ports for emule
cisco 800 series configuration 20 megs of Jazztel
cisco 800 series configuration dynamic orange
cisco 800 series parameters Synchronism
---------------------------------
Forum For specific questions Routers
If you have any tutorial for this section you can send it by pressing HERE.
Tags: ADSL, AdslTodo, Comtrend, FORUM, Forums, Huawei, ID LOW, Imagenio, TDT, Telefonica, Virus, ZyXEL, open ports, ADSL2 +, amper, antivirus, anti-virus online antivirus online, azureus, bitcomet, comparative adsl, comparative Conceptronic, configuration, setup, which is my ip, duplication, eMule, firmware, FTTH, worms, jazztelia, Linksys, offers, router, sagem, servers, smc, spyware, test speed, thomson, Trojans, tvp2p, VDSL , VDSL2, vdsltodo, xavi
June 28th, 2007 at 4:39 a.m.
Ok ... thanks .. I will try ... I've been looking for the famous Microsoft VM .. on the Microsoft site to send me know where to download SUN ...?
thanks ..
June 28th, 2007 at 3:13 pm
HELLO ... I NEED SOMEONE TO HELP ME SET FOR A 837 ADSL ROUTER WITH CISCO IP DYNAMICS OF TERRA chile ... HE ESCARBADO FOROS THOUSAND AND CAN NOT MADE ANDAR ... This is the configuration that we now have:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BNB
!
no logging buffered
no logging console
!
no aaa new-model
ip subnet-zero
ip dhcp excluded-address 192.168.0.1
!
ip dhcp pool Ethernet0
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 200.28.4.129 200.28.4.130
!
ip dhcp pool e0
dns-server 192.168.0.1 200.28.4.129 200.28.4.130
!
!
ip audit notify log
ip audit po max-events 100
no ftp-server write-enable
!
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
no ip mroute-cache
no cdp enable
hold-queue 100 out
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
Ilmi-keepalive no atm
pvc 8 / 32
aal5mux encapsulation ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer remote-name Redback
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap hostname
ppp chap password 0
ppp pap sent-username password 0
ppp IPCP dns request
ppp IPCP wins request
hold-queue 224 in
!
ip nat inside source list 101 interface overload Dialer0
ip Classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
!
access-list 101 permit ip 192.168.0.0 0.0.255.255 any
dialer-list 1 protocol ip permit
no cdp run
!
line with 0
exec-timeout 120 0
no modem enable
stopbits 1
line aux 0
line vty 0 4
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
!
end
IF ANYONE CAN HELP PLEASE CONTACT ME PLEASE ....!
shashiguchi@hotmail.com
GRACIASSSSSSSSSSSSSSSSSS ...
May 9th, 2008 at 10:26 pm
Hello everybody, you know the configuration through the web configurator Ono connection to a cable modem and most importantly, in this Single.
Can you do the Single of the web configurator?
Greetings
May 9th, 2008 at 11:16 pm
javi, this router is an ADSL router is not for cable.
May 10th, 2008 at 1:54 pm
ok, I realized after reading the characteristics, know how to quit in Single? leave behind a firewall.
Greetings
May 10th, 2008 at 3:16 pm
javi, because the truth is that I did not ever set Single, but try to find out how.
May 13th, 2008 at 4:41 pm
Pusieras be interesting in the config for Single adsl (we call). Currazo Thank you for this.
June 11th, 2008 at 6:58 pm
I've done everything you put in your video tutorial on the 837. and not given me any trouble, but not synchronized. The line is well, another router synchronized, but the lights are 837 TXD RXD-fast and not blinking light CD synchronism. That may be because the router is new, something missing in the programming ¿
June 11th, 2008 at 7:58 pm
Jose Garcia, who probably is the type of ADSL and ADSL2 + if I remember correctly the 837 is not compatible with ADSL2 +.
June 11th, 2008 at 8:25 pm
I know that does not support the Cisco 837 or ADSL2 or ADSL2 +. Try to put the "debug atm events" and look into the "Modem state = XXX" the value that comes out where XXX. It makes no change and 08 or 10 or 12 is that no signal from the DSLAM.
Greetings